Ross Pistons

Print Thread

Ross Pistons #2373335 09/19/17 03:10 PM 09/19/17 03:10 PM
Joined: Mar 2005 Posts: 525 Can , Nova Scotia , Cape Breto... C caper OP mopar
caper OP mopar C Joined: Mar 2005 Posts: 525 Can , Nova Scotia , Cape Breto...	I have a complete set of new Ross pistons, the compression height is 1.865, pin is .990. They were ordered for a 4.125 stroker engine. Can they be installed in a stock stroke 400 or 440 block, if so what rod? Or do they have to be installed in a stroker engine? They will fit a .030 over 400 block or .055 over 440 block. New best 10.18 , 1.40 60 ft 496 Scott Brown built, street driven 3600 lbs,654 hp , 653 ft tq

Hop To