Fast: You were dead on. Pulled a set of rockers out to check the pushrods. Comp Engineering. 8701 .080" wall 9.800" length on exhaust. 8702 .080" wall 9.850" length intake. Put the 8702 on the exhaust side. 1 1/4 turns when adjusted to .010" lash. Rechecked lift .710". Right where it is supposed to be. I just need to find a set of 8 # 8703 pushrods or the equivalent for the intake side. They are available from Summit. Any Comp dealers on here I can help support? Or does anyone have a half set of 9.900" 3/8 wall pushrods for sale?