New CNC Header Flanges for Indy-1 and B1

Print Thread

Re: New CNC Header Flanges for Indy-1 and B1 [Re: Quickrunner] #2340690 07/20/17 11:56 PM 07/20/17 11:56 PM
Joined: Jan 2003 Posts: 6,149 Melbourne , Australia LA360 master
LA360 master Joined: Jan 2003 Posts: 6,149 Melbourne , Australia	Any reason you went with 304 stainless as apposed to 316 or 321? Any 304 stainless header stuff I've seen tends to crack over time, as the material tends to expand and contract more than the other two grades I mentioned. Alan Jones

Entire Thread
Subject	Posted By	Posted
New CNC Header Flanges for Indy-1 and B1	408strokerdart	06/03/17 05:12 PM
Re: New CNC Header Flanges for Indy-1 and B1	AndyF	06/03/17 05:31 PM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	06/03/17 07:59 PM
Re: New CNC Header Flanges for Indy-1 and B1	jcc	06/03/17 08:07 PM
Re: New CNC Header Flanges for Indy-1 and B1	HEMI472	06/04/17 08:24 AM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	06/04/17 02:58 PM
Re: New CNC Header Flanges for Indy-1 and B1	Forest	06/04/17 06:26 PM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	06/04/17 07:48 PM
Re: New CNC Header Flanges for Indy-1 and B1	boatracer572	06/05/17 01:24 AM
Re: New CNC Header Flanges for Indy-1 and B1	cudatom	06/05/17 01:29 AM
Re: New CNC Header Flanges for Indy-1 and B1	BradH	07/17/17 04:58 AM
Re: New CNC Header Flanges for Indy-1 and B1	EchoSixMike	06/04/17 04:00 PM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	06/04/17 07:45 PM
Re: New CNC Header Flanges for Indy-1 and B1	scottb	06/05/17 01:35 AM
Re: New CNC Header Flanges for Indy-1 and B1	fbs63	06/05/17 02:07 AM
Re: New CNC Header Flanges for Indy-1 and B1	jcc	06/05/17 02:15 AM
Re: New CNC Header Flanges for Indy-1 and B1	moparx	06/05/17 03:16 PM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	06/05/17 09:21 PM
Re: New CNC Header Flanges for Indy-1 and B1	CompWedgeEngines	07/14/17 03:08 PM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	06/05/17 09:20 PM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	07/13/17 02:52 PM
Re: New CNC Header Flanges for Indy-1 and B1	dogdays	07/13/17 10:20 PM
Re: New CNC Header Flanges for Indy-1 and B1	sr4440	07/14/17 01:57 PM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	07/15/17 05:14 AM
Re: New CNC Header Flanges for Indy-1 and B1	sr4440	07/17/17 03:47 PM
Re: New CNC Header Flanges for Indy-1 and B1	Quickrunner	07/17/17 04:29 PM
Re: New CNC Header Flanges for Indy-1 and B1	Quickrunner	07/14/17 02:49 PM
Re: New CNC Header Flanges for Indy-1 and B1	408strokerdart	07/15/17 05:09 AM
Re: New CNC Header Flanges for Indy-1 and B1	Quickrunner	07/17/17 05:57 PM
Re: New CNC Header Flanges for Indy-1 and B1	LA360	07/21/17 03:56 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To