Cam for 505 wedge

Print Thread

Cam for 505 wedge #231536 02/21/09 05:20 PM 02/21/09 05:20 PM
Joined: Mar 2005 Posts: 3,141 Central NC gch OP master
gch OP master Joined: Mar 2005 Posts: 3,141 Central NC	While I may just as well end up with a custom ground solid I have always wanted to see how one of the Lunati Voodoo cams would perform. Motor in question is pump gas 505 10.5-1 ported e-heads sd intake w/850 HEAVY STREET CAR 4600lbs+ 3000 tight 10" likely 3.55 gears What rpm range could I expect out of the Voodoo 60305 284/292 242/252 @.050 .533/.552 110LS 106IC Just bench racing here.Is this a good fit for the intended usage and weight of car?I would like to see 5500 max rpm.Worth a try or much better to be had for similar money? I can go solid just as easy but if I can get close with a hyd and 1.6 rockers I am lazy.Hyd roller is not out of the question but pricey.

Hop To