|
Re: Challenger SE vinly trim location
[Re: 340propak]
#229985
02/21/09 02:01 PM
02/21/09 02:01 PM
|
Joined: Jan 2003
Posts: 2,679 Maple Ridge, BC, Canada
Barnabas_Kriss
master
|
master
Joined: Jan 2003
Posts: 2,679
Maple Ridge, BC, Canada
|
Quote:
Thanks for all the info, I guess the highly compressable insulation would be there for any misalignment of the plug which should probably be flush with/or below the surface of the roofline, I also understand that sometype of metallic tape was used to cover over the screw holes on the plug, so just to double check the install, I will stretch the vinyl top over the plug, glue inside the window channel and install the 3/8" stainless keeper, does that sound right
thanks again john
Yes, that sounds about right. Mine didn't have any tape on the screw heads, probably as it is a very early build date car, but I've seen that on other SE's.
|
|
|
|
|
|