Which RB valley pan for milled heads and zero decked block?

Print Thread

Re: Which RB valley pan for milled heads and zero decked block? [Re: Adam71Charger] #2294965 04/27/17 12:45 PM 04/27/17 12:45 PM
Joined: Jan 2003 Posts: 31,085 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,085 Oregon	The block should have had the valley walls cut down at the same time the deck was milled. Put the heads on the block and there should be a three way match with the wall, deck and head surface all coming to a point. If there is a three way match at one point then you should be good to go.

Entire Thread
Subject	Posted By	Posted
Which RB valley pan for milled heads and zero decked block?	Adam71Charger	04/27/17 09:53 AM
Re: Which RB valley pan for milled heads and zero decked block?	Jeremiah	04/27/17 03:54 PM
Re: Which RB valley pan for milled heads and zero decked block?	an8sec70cuda	04/27/17 03:59 PM
Re: Which RB valley pan for milled heads and zero decked block?	BSB67	04/28/17 01:18 AM
Re: Which RB valley pan for milled heads and zero decked block?	AndyF	04/27/17 04:45 PM
Re: Which RB valley pan for milled heads and zero decked block?	Adam71Charger	04/27/17 09:17 PM
Re: Which RB valley pan for milled heads and zero decked block?	AndyF	04/27/17 10:36 PM
Re: Which RB valley pan for milled heads and zero decked block?	Adam71Charger	04/27/17 10:41 PM
Re: Which RB valley pan for milled heads and zero decked block?	feets	04/28/17 06:16 PM
Re: Which RB valley pan for milled heads and zero decked block?	an8sec70cuda	04/28/17 08:41 PM
Re: Which RB valley pan for milled heads and zero decked block?	BSB67	04/28/17 11:20 PM
Re: Which RB valley pan for milled heads and zero decked block?	JohnRR	04/30/17 03:55 PM

Hop To