One quart jar with a lid. Drill small hole in lid the size of a hose that will fit tightly over your bleeder valve. Insert other end of hose into semi snug,,,,not tight fit into the hole in the lid. Make certain that hoses reaches close to floor of jar. Place 3 or 4 inches of fresh brake fluid in jar sufficient to comfortably cover the end of the hose.

Open bleeder valve and pump away on brake pedal.


Pushing down on pedal forces fluid into jar, fluid in jar prevents air from re-entering brake caliper or cylinder when letting up on pedal,,,,except possibly for a very small amount at initial pumps.

Pump brakes until you see no air bubbles in jar fluid,,up to you how you see the jar if by yourself. Close bleeder. Starting from most distant wheel from MC, go to the next.closer one.

Be certain to check MC for fluid regularly and replenish as required.