Originally Posted By stumpy
They are included in case the heads or block have been shaved and are no longer in stock specs. With a stock set up Ma Mopar didn't need any paper gaskets and neither should you.


Actually, if you shave the block & heads the paper gaskets won't even fit..... ask me how I know.

I have run them WITHOUT the valley pan (I cut it so the metal around the intake ports is gone) & silicone the edge of the pan to the heads. I may be doing that again this summer.

70 Roadrunner convt. street car 440+6, NOS, 4-spd, SS springs '96 Mustang GT convt. street car '04 4.6 SOHC, NOS, auto, lowered "Officer, that button is for short on-ramps"