searching on the web i have seen the 95' Lebaron uses a 7/8 MC.It uses very different port threads and i cant,t find plug and play adpters for them, so i would need to start fabricating lines, ordering fittings etc.
Besides, i think that the piston back must to be machined to fit the stock pushrod.

I going to try a 15/16 first.If it does not work ,i will go for the 7/8.They are not expensive anyway.

If somebody knows were i could find a 9/16-20 female to 9/16-18 male brake adapter,it would be a big help.

Thanks.