trick flow 240 VS. Perf. r.p.m. port molds.

Print Thread

trick flow 240 VS. Perf. r.p.m. port molds. #2260108 02/26/17 09:58 PM 02/26/17 09:58 PM
Joined: Jan 2003 Posts: 1,022 Andrews,In. U.S.of A. 6 67_Satellite OP super stock
67_Satellite OP super stock 6 Joined: Jan 2003 Posts: 1,022 Andrews,In. U.S.of A.	http://i355.photobucket.com/albums/r461/FriedDonuts/port%20mold_zpsbotjhqo8.jpg Made some port molds earlier this winter of my performer R.P.M. port and Bubby 440'S new trick flow 240 port. Mine have been mildly ported and are 220c.c. vs. I think 215 c.c. stock.Looks like most of the increased area is in an improved bowl area. Minimum cross section at the pinch is the same.Edelbrock on top t.f. on bottom. Last edited by 67_Satellite; 02/26/17 10:12 PM.

Entire Thread
Subject	Posted By	Posted
trick flow 240 VS. Perf. r.p.m. port molds.	67_Satellite	02/27/17 01:58 AM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	67_Satellite	02/27/17 02:00 AM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	67_Satellite	02/27/17 02:04 AM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	slantzilla	02/27/17 03:26 AM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	BradH	02/27/17 02:32 PM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	RAMM	02/27/17 03:08 PM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	LaRoy Engines	02/27/17 04:05 PM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	fast68plymouth	02/27/17 06:38 PM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	Roughbird72	02/27/17 08:35 PM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	fast68plymouth	02/27/17 09:13 PM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	67_Satellite	02/27/17 09:59 PM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	BradH	02/27/17 11:00 PM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	KOS	02/28/17 12:19 AM
Re: trick flow 240 VS. Perf. r.p.m. port molds.	67_Satellite	02/28/17 02:50 AM

Hop To