Valve springs: Why must they be compressed down to .050 ?

Print Thread

Re: Valve springs: Why must they be compressed down to .050 ? [Re: Cab_Burge] #2257001 02/21/17 03:15 AM 02/21/17 03:15 AM
Joined: Jan 2003 Posts: 6,137 Melbourne , Australia LA360 master
LA360 master Joined: Jan 2003 Posts: 6,137 Melbourne , Australia	Basically anyone who built Comp Eliminator or Super Stock engines that I've dealt with usually runs their springs closer to bind than 0.040"-0.050" Many go to around 0.020" or there abouts Alan Jones

Entire Thread
Subject	Posted By	Posted
Valve springs: Why must they be compressed down to .050 ?	hemienvy	02/17/17 08:01 PM
Re: Valve springs: Why must they be compressed down to .050 ?	Cab_Burge	02/17/17 08:17 PM
Re: Valve springs: Why must they be compressed down to .050 ?	hemienvy	02/20/17 10:00 PM
Re: Valve springs: Why must they be compressed down to .050 ?	Cab_Burge	02/21/17 12:02 AM
Re: Valve springs: Why must they be compressed down to .050 ?	Thumperdart	02/21/17 01:59 AM
Re: Valve springs: Why must they be compressed down to .050 ?	DaveRS23	02/21/17 02:31 AM
Re: Valve springs: Why must they be compressed down to .050 ?	Anonymous	02/21/17 04:01 AM
Re: Valve springs: Why must they be compressed down to .050 ?	Cab_Burge	02/21/17 06:35 AM
Re: Valve springs: Why must they be compressed down to .050 ?	LA360	02/21/17 07:15 AM
Re: Valve springs: Why must they be compressed down to .050 ?	dogdays	02/24/17 02:04 AM
Re: Valve springs: Why must they be compressed down to .050 ?	polyspheric	02/24/17 04:26 PM

Hop To