I need some opinins here on fix for motor #2

Print Thread

Re: I need some opinins here on motor #2 [Re: 340SIX] #224137 02/14/09 12:52 PM 02/14/09 12:52 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	If have a couple comments/thoughts: 1) Did anyone sonic check that block? at 4.100 you may get a surprise. You definately ( if machinist didnt already, and I HOPE he did)will need to know what the cylinder thickness is before anything. What are the sonic check numbers, especially the major thrusts? 2) You seem to be questioning your machinsts decisions. If you trust him, then go with his suggestions, but again, you seem to have some doubt? 3) You made it through the hurricane, so you can do anything. Keep plugging away, dont stop now. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Entire Thread
Subject	Posted By	Posted
I need some opinins here on fix for motor #2	340SIX	02/14/09 05:34 AM
Re: I need some opinins here	bonefish	02/14/09 02:53 PM
Re: I need some opinins here	B1MAXX	02/14/09 02:59 PM
Re: I need some opinins here	MR_P_BODY	02/14/09 03:10 PM
Re: I need some opinins here on motor #2	340SIX	02/14/09 04:16 PM
Re: I need some opinins here on motor #2	CompWedgeEngines	02/14/09 04:52 PM
Re: I need some opinins here on motor #2	340SIX	02/15/09 12:54 AM

Hop To