Originally Posted By moparx
i believe you should see between 1000-1200psi at the front calipers. if you are only getting 800, you need to step down in master cylinder bore size, increase the caliper bore size, or check your pedal ratio to see if it may be off some. see if your boss can view the gauge while you stomp the pedal. i can't remember, are running power or a manual setup ? were you having any issues stopping ?
beer
Thanks guys. Good idea on switching. Her idea on pedal pressure might be totally different than mine. I'll wipe down the creeper this morning. smile Not really having any braking problems. It's a manual system. 1" master bores ( what Wilwood suggested for my set up ). Pedal ratio is pre-set by Wilwood - reverse dual master system ( masters sit on the back side of the firewall ) comes with pedal and pedal mount. GM intermediate car size calipers with 11" rotors.

wipers1.jpg
Fastest 300