Would You Use This Spindle?

Print Thread

Re: Would You Use This Spindle? [Re: vdriver] #2160618 09/24/16 01:43 AM 09/24/16 01:43 AM
Joined: Oct 2005 Posts: 8,902 Ontario, Canada S Stanton Don't question me!
Stanton Don't question me! S Joined: Oct 2005 Posts: 8,902 Ontario, Canada	That area was machined - just not to a fine finish. Usually looked like fine threads because the cutter ran down that area at a higher feed rate.

Entire Thread
Subject	Posted By	Posted
Would You Use This Spindle?	vdriver	09/23/16 03:30 AM
Re: Would You Use This Spindle?	BDW	09/23/16 03:44 AM
Re: Would You Use This Spindle?	451Mopar	09/23/16 04:13 AM
Re: Would You Use This Spindle?	hemi71x	09/23/16 04:16 AM
Re: Would You Use This Spindle?	ozymaxwedge	09/23/16 04:21 AM
Re: Would You Use This Spindle?	jcc	09/23/16 04:25 AM
Re: Would You Use This Spindle?	vdriver	09/23/16 05:00 AM
Re: Would You Use This Spindle?	therocks	09/23/16 06:05 AM
Re: Would You Use This Spindle?	Stanton	09/23/16 02:52 PM
Re: Would You Use This Spindle?	dogdays	09/23/16 06:01 PM
Re: Would You Use This Spindle?	vdriver	09/23/16 07:07 PM
Re: Would You Use This Spindle?	fury4speed	09/26/16 08:18 PM
Re: Would You Use This Spindle?	6PakBee	09/25/16 04:00 PM
Re: Would You Use This Spindle?	dogdays	09/26/16 07:49 PM
Re: Would You Use This Spindle?	jcc	09/26/16 09:51 PM
Re: Would You Use This Spindle?	Skeptic	09/27/16 03:26 PM
Re: Would You Use This Spindle?	62maxwgn	09/27/16 04:44 PM
Re: Would You Use This Spindle?	Morty426	09/23/16 06:41 PM
Re: Would You Use This Spindle?	crlush	09/23/16 08:00 PM
Re: Would You Use This Spindle?	markz528	09/23/16 09:00 PM
Re: Would You Use This Spindle?	vdriver	09/23/16 10:20 PM
Re: Would You Use This Spindle?	cudaman1969	09/24/16 01:02 AM
Re: Would You Use This Spindle?	jcc	09/24/16 02:01 AM
Re: Would You Use This Spindle?	markz528	09/24/16 02:30 AM
Re: Would You Use This Spindle?	jcc	09/24/16 02:39 AM
Re: Would You Use This Spindle?	cudaman1969	09/24/16 07:52 PM
Re: Would You Use This Spindle?	BDW	09/24/16 03:33 AM
Re: Would You Use This Spindle?	markz528	09/24/16 04:12 AM
Re: Would You Use This Spindle?	Stanton	09/24/16 05:43 AM
Re: Would You Use This Spindle?	Stanton	09/24/16 05:46 AM
Re: Would You Use This Spindle?	B5 Bee	09/24/16 05:57 AM
Re: Would You Use This Spindle?	moparx	09/24/16 03:49 PM
Re: Would You Use This Spindle?	AndyF	09/24/16 05:32 PM
Re: Would You Use This Spindle?	cudaman1969	09/26/16 09:50 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To