Are you running a 727.. if so that move backing up and
just pulling forward a few inches is a bad move.. you
dont set the sprag doing that
I made a boo boo staging, that is why I backed up, waited on the other guy, then rolled back in. Any advice on staging with a Trans brake will be appreciated.
Trans brake is easy... just ALWAYS be rolling forward
so it sets the sprag.. IF you back up make sure you roll
in forward ABOUT 4' to set the sprag... when you hit the
prestage light bring up the revs to about 1500 or more..
(some trans brakes will creep if you arent up in the rpm
some).. creep in to set the stage light(try to always be
the same location).. then hit the button.. it MIGHT roll
back and forth if your moving when you hit the button(slack
in the drive train).. then get the revs and be ready
