Quote:

Here's the one that I built for the book I'm writing.
Dyno tested it yesterday.

14" vacuum at 800 RPM idle.
700 ft lbs at 3500 RPM.
725 HP at 6200
91 octane pump gas.
EFI with coil-on-plug ignition.



Sorry, but I don't like the individual coils on wires. Takes a simple design and adds a lot of complexity and messs..

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk