383 Timing woes - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 383 Timing woes

Print Thread

Re: 383 Timing woes [Re: RapidRobert] #2123199 08/02/16 07:53 AM 08/02/16 07:53 AM
Joined: Feb 2007 Posts: 195 SE PA Paul G OP member
Paul G OP member Joined: Feb 2007 Posts: 195 SE PA	car went through a complete resto. Engine was apart when I bought it. Block was hot tanked and rebuilt to factory specs except for mild head work, 0.030" over, Cam is a Mopar Purple shaft 284/284, 0.484/0.484". Stock Holley carb (600cfm?)and stock intake. Distributor is factory that came with the car I disassembled/cleaned it up installed new points and condenser, cap and rotor. Coil is a OEM factory unit. Using new reproduction wires......

Entire Thread
Subject	Posted By	Posted
383 Timing woes	Paul G	08/01/16 05:35 PM
Re: 383 Timing woes	RapidRobert	08/01/16 07:32 PM
Re: 383 Timing woes	451Mopar	08/01/16 07:54 PM
Re: 383 Timing woes	Paul G	08/02/16 02:00 AM
Re: 383 Timing woes	RapidRobert	08/02/16 02:41 AM
Re: 383 Timing woes	Paul G	08/02/16 11:53 AM
Re: 383 Timing woes	bee1971	08/02/16 11:29 PM
Re: 383 Timing woes	topside	08/02/16 10:32 PM
Re: 383 Timing woes	dart4forte	08/02/16 10:42 PM
Re: 383 Timing woes	RapidRobert	08/02/16 11:26 PM
Re: 383 Timing woes	sthemi	08/02/16 11:37 PM
Re: 383 Timing woes	bee1971	08/03/16 01:25 AM
Re: 383 Timing woes	bee1971	08/03/16 01:32 AM
Re: 383 Timing woes	Mr.Yuck	08/03/16 06:43 PM
Re: 383 Timing woes	Runnin74	08/03/16 09:09 PM
Re: 383 Timing woes	Paul G	08/04/16 05:56 PM
Re: 383 Timing woes	RapidRobert	08/05/16 06:56 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1