Drag slck to frame rail clearance?

Print Thread

Re: Drag slck to frame rail clearance? [Re: Mopar_Ray] #2110886 07/15/16 11:33 PM 07/15/16 11:33 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Originally Posted By Mopar_Ray I am going to run some MT 29.5/10.5-15W slicks soon. I have about 5/8" clearance from tire to frame rail (Springs moved inside frame) Is that enough? Thats on the minimum side but should clear.. but since its on the frame side you shouldnt have any sharp edges like out on the fender side.. might rub on quicker cornering

Entire Thread
Subject	Posted By	Posted
Drag slck to frame rail clearance?	Mopar_Ray	07/16/16 03:25 AM
Re: Drag slck to frame rail clearance?	MR_P_BODY	07/16/16 03:33 AM
Re: Drag slck to frame rail clearance?	dvw	07/16/16 03:57 AM
Re: Drag slck to frame rail clearance?	sgcuda	07/16/16 04:12 AM
Re: Drag slck to frame rail clearance?	Leigh	07/16/16 04:13 AM
Re: Drag slck to frame rail clearance?	MR_P_BODY	07/16/16 04:25 AM
Re: Drag slck to frame rail clearance?	Al_Alguire	07/16/16 07:11 AM
Re: Drag slck to frame rail clearance?	Mopar_Ray	07/16/16 02:49 PM
Re: Drag slck to frame rail clearance?	Cab_Burge	07/18/16 06:09 PM
Re: Drag slck to frame rail clearance?	dvw	07/16/16 03:35 PM
Re: Drag slck to frame rail clearance?	Al_Alguire	07/18/16 07:26 AM

Hop To