The location of the baffle has a important part of
this issue.. put it over the front wide rocker hold
down.. also a big flat baffle doesnt do anything..
it just holds the oil there for a minute while the
air headed out pulls the oil with it... I made up
a pair of U that one went inside the other.. with a
small hole at the bottom of the lower U... so it was
basically a U and a inverted U with about 3/16 between
the walls... keep it narrow so its not in line with any
of the rockers... hope you get the idea... if I could
draw on this thing I would show you... and put them both
on the same place in the front... when you decell you have
less air flow and pressure so the oil going forward has
less of a chance getting out