51 DeSoto flathead to 904 automatic

Print Thread

Re: 51 DeSoto flathead to 904 automatic [Re: Rhinodart] #2073395 05/14/16 06:39 PM 05/14/16 06:39 PM
Joined: Feb 2009 Posts: 91 Peoples Republic of Oregon W wayfarer member
wayfarer member W Joined: Feb 2009 Posts: 91 Peoples Republic of Oregon	Thanks Kevin. More details here: http://www.qualityengineeredcomponents.com/?page_id=222 and in the web pages. Recall that the L6 mounts the rear of the engine at/on the bell so when you lose the bell you will be doing some fab work. There are only TWO adapters left in inventory and I have not yet decided if I will make any more...simply low/no demand for the TF swap. There is also the ability to use the old PowerFlite as they were oem with the late 50's L6 . Call if you have questions. Gary Last edited by wayfarer; 05/14/16 06:41 PM. www.qualityengineeredcomponents.com Early Hemi Parts and Tech EarlyHemi and flat 6&8 trans adapters *inventory clearance in progress. Nothing held back. See website.*

Entire Thread
Subject	Posted By	Posted
51 DeSoto flathead to 904 automatic	Rhinodart	05/12/16 04:07 PM
Re: 51 DeSoto flathead to 904 automatic	Twostick	05/12/16 08:44 PM
Re: 51 DeSoto flathead to 904 automatic	savoy64	05/13/16 01:50 AM
Re: 51 DeSoto flathead to 904 automatic	wayfarer	05/14/16 10:39 PM

Hop To