Hey guys... I've been running the Comp 23-630-5 cam for years with great results. But since I'm putting a new motor together and my current cam is not only three bolt but also three piece I was looking at other grinds. I'm looking at the Comp 23-634-5. Anyone have any experience with this grind?
Motor specs:
499" low deck
CNC295 Indy SR's flow 355
Indy intake
AED 1000cfm 4150
2" tube headers
Molnar 4.15 2.200 .990 crank
Molnar 6.76 rods
JE pistons .-6 flat tops
4.56 gear
32" tire
Car weighs 2330# race weight shift at 6500 traps 7100
http://www.summitracing.com///parts/cca-23-630-5http://www.summitracing.com/parts/cca-23-634-5
