World cast iron 4.490 rough bore block problem !

Print Thread

Re: World cast iron 4.490 rough bore block problem ! [Re: Cab_Burge] #2024360 03/04/16 11:19 AM 03/04/16 11:19 AM
Joined: Jun 2015 Posts: 315 Northeast Indiana 7 73DAD enthusiast
73DAD enthusiast 7 Joined: Jun 2015 Posts: 315 Northeast Indiana	I have the same 4.490 rough bore block, a couple years old, fresh machined getting ready to assemble. You can bet I'll be double checking that surface! I'll check the new one too and compare, THANK YOU for sharing and preventing potential disaster!

Entire Thread
Subject	Posted By	Posted
World cast iron 4.490 rough bore block problem !	Cab_Burge	03/03/16 11:48 PM
Re: World cast iron 4.490 rough bore block problem !	dartman366	03/04/16 02:41 AM
Re: World cast iron 4.490 rough bore block problem !	Cab_Burge	03/04/16 03:33 AM
Re: World cast iron 4.490 rough bore block problem !	rowin4	03/04/16 06:35 AM
Re: World cast iron 4.490 rough bore block problem !	Cab_Burge	03/04/16 07:35 AM
Re: World cast iron 4.490 rough bore block problem !	rowin4	03/04/16 07:41 AM
Re: World cast iron 4.490 rough bore block problem !	Cab_Burge	03/04/16 07:56 AM
Re: World cast iron 4.490 rough bore block problem !	73DAD	03/04/16 03:19 PM

Hop To