Originally Posted By tex013
Originally Posted By Cab_Burge
If those are the only choices I would run the Howards cam and install it at 102 to 105 intake lobe center thumbs twocents With that weight and pump gas the motor needs to make all the power it can in the first hundred feet to get it to E.T. like you want twocents work

Cab ,
Sorry for my poor responce . These cams are ground on 104 intake centreline
Thanks

Tex


I agree, if those were my only choices, I would run the smallest, the Howards cam.

But, what do you mean that all those cams were ground on a 104 Intake centerline.

Cams are grounds at A LSA and not at a Intake centerline. They are installed at a specific ICL

You stated differences of 110-108-106 LSA for the three separate cams. Im sure they weren't all ground on a 104 LSA Did , you mean a recommended installed 104 ICL

Also, I wouldnt use any of the cams you listed for what your doing. The hughes cam listed 6872 would be better IMO too.


Last edited by Sport440; 02/07/16 05:33 AM.