Connecting Electrical Choke to Engine Bay harness

Print Thread

Re: Connecting Electrical Choke to Engine Bay harness [Re: John_Kunkel] #2001261 01/29/16 04:14 PM 01/29/16 04:14 PM
Joined: Jan 2003 Posts: 524 B BigAg OP mopar
BigAg OP mopar B Joined: Jan 2003 Posts: 524	Originally Posted By John_Kunkel The double blue wire on the ballast resistor is the most convenient source for the electric choke. Just use one of these to piggyback the spade terminals. That sounds like a pretty simple solution. Any idea where to pick one of those up?

Entire Thread
Subject	Posted By	Posted
Connecting Electrical Choke to Engine Bay harness	BigAg	01/29/16 04:24 PM
Re: Connecting Electrical Choke to Engine Bay harness	Supercuda	01/29/16 04:33 PM
Re: Connecting Electrical Choke to Engine Bay harness	TJP	01/29/16 05:24 PM
Re: Connecting Electrical Choke to Engine Bay harness	71rm23	01/29/16 06:10 PM
Re: Connecting Electrical Choke to Engine Bay harness	RapidRobert	01/29/16 06:37 PM
Re: Connecting Electrical Choke to Engine Bay harness	Polarapete	01/30/16 10:04 PM
Re: Connecting Electrical Choke to Engine Bay harness	John_Kunkel	01/30/16 10:14 PM
Re: Connecting Electrical Choke to Engine Bay harness	RapidRobert	01/30/16 10:25 PM
Re: Connecting Electrical Choke to Engine Bay harness	John_Kunkel	01/30/16 10:46 PM
Re: Connecting Electrical Choke to Engine Bay harness	John_Kunkel	01/29/16 08:02 PM
Re: Connecting Electrical Choke to Engine Bay harness	BigAg	01/29/16 08:14 PM
Re: Connecting Electrical Choke to Engine Bay harness	RapidRobert	01/29/16 08:23 PM
Re: Connecting Electrical Choke to Engine Bay harness	383man	01/30/16 05:38 AM
Re: Connecting Electrical Choke to Engine Bay harness	crackedback	01/30/16 09:21 AM
Re: Connecting Electrical Choke to Engine Bay harness	BigAg	01/31/16 12:47 AM

Hop To