setting valve spring height

Print Thread

Re: setting valve spring height [Re: rowin4] #1995629 01/21/16 05:23 PM 01/21/16 05:23 PM
Joined: Jan 2012 Posts: 2,678 Stuttgart, Arkansas rickseeman master
rickseeman master Joined: Jan 2012 Posts: 2,678 Stuttgart, Arkansas	Normally you just get it as close as you can given the shims are in .015" increments. 2011 Drag Pak Challenger

Entire Thread
Subject	Posted By	Posted
setting valve spring height	rowin4	01/21/16 08:37 PM
Re: setting valve spring height	rickseeman	01/21/16 09:23 PM
Re: setting valve spring height	dvw	01/21/16 09:30 PM
Re: setting valve spring height	Thumperdart	01/21/16 09:55 PM
Re: setting valve spring height	madscientist	01/21/16 11:01 PM
Re: setting valve spring height	YO7_A66	01/21/16 11:30 PM
Re: setting valve spring height	Cab_Burge	01/22/16 01:22 AM
Re: setting valve spring height	rowin4	01/22/16 05:18 AM
Re: setting valve spring height	Cab_Burge	01/22/16 06:13 AM
Re: setting valve spring height	383man	01/22/16 07:07 AM
Re: setting valve spring height	440Jim	01/23/16 06:11 PM
Re: setting valve spring height	440Jim	01/23/16 06:09 PM
Re: setting valve spring height	Jerry Kathe	01/24/16 01:12 AM
Re: setting valve spring height	boatracer572	01/24/16 02:07 AM
Re: setting valve spring height	pittsburghracer	01/24/16 02:18 AM

Hop To