made some progress today with the 13.5:1 410 build

Print Thread

Re: made some progress today with the 13.5:1 410 build [Re: mopar dave] #1941634 10/30/15 01:30 PM 10/30/15 01:30 PM
Joined: Aug 2006 Posts: 610 long time lurker, short time p... P PorkyPig mopar
PorkyPig mopar P Joined: Aug 2006 Posts: 610 long time lurker, short time p...	Is it too late to pull the pistons back out and take care of all those sharp edges on the domes and valve reliefs? That's a lot of CR to use with an as-machined piston.

Entire Thread
Subject	Posted By	Posted
made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 02:22 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 02:29 AM
Re: made some progress today with the 13.5:1 410 build	madscientist	10/30/15 02:52 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 03:13 AM
Re: made some progress today with the 13.5:1 410 build	RickRoss	10/31/15 02:52 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/31/15 03:42 AM
Re: made some progress today with the 13.5:1 410 build	B3422W5	10/30/15 02:59 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 03:15 AM
Re: made some progress today with the 13.5:1 410 build	B3422W5	10/30/15 09:04 AM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 03:57 PM
Re: made some progress today with the 13.5:1 410 build	PorkyPig	10/30/15 05:30 PM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/31/15 03:41 AM
Re: made some progress today with the 13.5:1 410 build	sleepyhead416	10/30/15 02:28 PM
Re: made some progress today with the 13.5:1 410 build	mopar dave	10/30/15 03:52 PM
Re: made some progress today with the 13.5:1 410 build	D-50	10/30/15 11:45 PM

Hop To