Thanks for the info.
I have a set of Edelbrock RPM heads that were CNC ported
and have bigger valves and springs in them. I have a Victor
single plain intake that was port matched to the heads and
has been blended inside.
Also have a set of 1.5 Harland Sharp roller rockers, and
2" ceramic coated under chassis headers.
I plan on running an electric water pump and an electric
fuel pump.
All this going into my 71 Demon that has an AlterKtion front
end and Caltrac mono-leafs and sliders out back.
Should weigh around 2800lbs. when done.