383 forged crank in a 400 block why not?

Print Thread

Re: 383 forged crank in a 400 block why not? [Re: dogdays] #1809780 04/22/15 10:47 PM 04/22/15 10:47 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	I think the OP is asking this since most 400's are cast cranks and most 383's are forged cranks. Ron

Entire Thread
Subject	Posted By	Posted
383 forged crank in a 400 block why not?	jdralph	04/22/15 09:47 PM
Re: 383 forged crank in a 400 block why not?	an8sec70cuda	04/22/15 09:50 PM
Re: 383 forged crank in a 400 block why not?	451Cuda	04/22/15 09:54 PM
Re: 383 forged crank in a 400 block why not?	John_Kunkel	04/22/15 11:13 PM
Re: 383 forged crank in a 400 block why not?	AndyF	04/22/15 09:55 PM
Re: 383 forged crank in a 400 block why not?	dizuster	04/22/15 10:23 PM
Re: 383 forged crank in a 400 block why not?	72Swinger	04/22/15 10:41 PM
Re: 383 forged crank in a 400 block why not?	unknown	04/23/15 12:22 AM
Re: 383 forged crank in a 400 block why not?	383man	04/23/15 12:34 AM
Re: 383 forged crank in a 400 block why not?	dogdays	04/23/15 01:35 AM
Re: 383 forged crank in a 400 block why not?	383man	04/23/15 02:47 AM
Re: 383 forged crank in a 400 block why not?	72N96RR	04/23/15 03:36 AM
Re: 383 forged crank in a 400 block why not?	383man	04/23/15 04:22 AM
Re: 383 forged crank in a 400 block why not?	dogdays	04/23/15 05:10 PM
Re: 383 forged crank in a 400 block why not?	72N96RR	04/24/15 07:26 PM

Hop To