Having trouble getting the door striker adjusted on my 70 challenger. The latch has been cleaned and lubed, and the striker is a new repo from a popular seller on ebay. Outer door handle is a new repo as well. With door open, the latch works fine with either handle. When it’s closed it seems to latch fine, but the door won’t open without pulling out on the door frame. I’ve put masking tape around the striker in the door jam so I can make fine adjustments, can’t seem to nail down the location. What’s a little strange is if I take a striker out of the door jam and put it into latch in the fully latched position it seems to not have any slop at all. Almost in a bind. Sort of like the OD of the end of the striker is too big. If anyone can measure the OD of an oem one, I’ll compare to mine. thanks