Some of you may remember my truck that I did the roller paint job on. Its a 318 auto with stock TBI system still in place. I actually need to verify 727 vs 904. Can I tell by the pan shape or just the rail numbers?

Anywho, I want to take the mild 360 that I pulled from my sig car, and put it in the truck with a carb. What are the parts needed and plan that I should follow to get this complete? I have the complete motor with a good functioning Eddy 600, a stock ignition setup (dizzy, orange box etc...) I know I need a truck 360 oil pan, I can use spacers on the drivers side motormount to make them work. I'll need the aftermarket flexplate in order to run the converter thats already on the trans. A fuel pressure regulator to protect the carb from the trucks electric fuel pump. Anything else I need to look at. Anything that I need to do as it pertains to the trucks computer?

Any help is appreciated
roe