Quote:

---

Too bad you are going to cut it up, not many left and good color/options. I got 29x10.5x15 slicks in my Dart without tubbing, just moving the springs inboard and custom offset wheels. Only had to use the hammer in a couple spots on the inner wheelhouses after a few passes to see where the rubber was...

---

Gonna make it a clean cut
3 1/2" strip to widen the tub, all welds on the inside of the tub.
like we did on the 71








If I had the original Eng, Trans, console, bucket seats.
I would keep it Factory

also it needs both front floor pans, spare tire well, both trunk extensions and quarters, rear valance.

plus, we have a narrowed Rear and 10" x 15" rally wheels just laying here


When we went to look at a green 70 Dart
We went there to buy the roof for the 72 Dart,
but had to buy the yellow one in order to get the green 70 parts car.



When I saw the yellow one, i saw