Siamesed hemi block on the street

Print Thread

Re: Siamesed hemi block on the street [Re: Hemi_Ram] #175597 12/29/08 10:52 PM 12/29/08 10:52 PM
Joined: Jan 2003 Posts: 6,392 nielsville, minn. Q quickd100 master
quickd100 master Q Joined: Jan 2003 Posts: 6,392 nielsville, minn.	Larry and I, (HemiRam) used the same machinist and had the same blocks 4.498 bore. Our machinist was the only guy between us and Minneapolis, Mn. with a 4.50 bore torque plate which was used to finish hone our blocks. He's also the same machinist that helped fix the lifter bore fiasco on the Moparts EM entree a few years ago. Dave

Entire Thread
Subject	Posted By	Posted
Siamesed hemi block on the street	crowbait	12/27/08 12:01 AM
Re: Siamesed hemi block on the street	rvw	12/27/08 12:35 AM
Re: Siamesed hemi block on the street	quickd100	12/27/08 01:33 AM
Re: Siamesed hemi block on the street	Rug_Trucker	12/28/08 10:58 PM
Re: Siamesed hemi block on the street	quickd100	12/28/08 11:28 PM
Re: Siamesed hemi block on the street	crowbait	12/29/08 10:51 PM
Re: Siamesed hemi block on the street	Hemi_Ram	12/29/08 11:08 PM
Re: Siamesed hemi block on the street	crowbait	12/30/08 01:08 AM
Re: Siamesed hemi block on the street	Hemi_Ram	12/30/08 01:37 AM
Re: Siamesed hemi block on the street	quickd100	12/30/08 02:52 AM
Re: Siamesed hemi block on the street	torkrules	12/27/08 04:36 PM
Re: Siamesed hemi block on the street	crowbait	12/28/08 02:26 PM
Re: Siamesed hemi block on the street	Hemi_Ram	12/28/08 04:36 PM
Re: Siamesed hemi block on the street	AndyF	12/28/08 07:36 PM

Hop To