Bolt in roll bars for A-body?

Print Thread

Re: Bolt in roll bars for A-body? [Re: drag440] #172299 12/21/08 05:43 PM 12/21/08 05:43 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Quote: I just made my own. When you order your kit just tell them to send extra 6" X 6" plates and weld one to your bar and bolt the other under your floorpan with 4- 3/8's bolts. Where your rear bars leave the main hoop cut them about 4'' out and put a smaller about 6'' long bar inside and weld it at the bar end and bolt it to the other end with a 3/8" bolt that goes through both. On the side bars get a swing out kit and use half the kit at the tops of both bars and bolt the bottom with 2- 6" X 6" plates. Thats just what I was going to say as we welded the 6 point bar in my sons Dart but we could have gotten extra plates and bolted it in. I dont feel its as safe as welded but it can be done. Ron Last edited by 383man; 12/21/08 05:44 PM.

Hop To