Problem at the machine shop

Print Thread

Re: Problem at the machine shop [Re: sr4440] #1713043 12/21/14 02:12 PM 12/21/14 02:12 PM
Joined: Jan 2004 Posts: 8,343 fredericksburg,va C cudaman1969 master
cudaman1969 master C Joined: Jan 2004 Posts: 8,343 fredericksburg,va	just use a thicker head gasket(multiple layer gaskets can go up to 1/4 inch) deck height will be back where the intake fits.

Entire Thread
Subject	Posted By	Posted
Problem at the machine shop	rickb67	12/20/14 06:43 AM
Re: Problem at the machine shop	Twostick	12/20/14 07:23 AM
Re: Problem at the machine shop	70AARcuda	12/20/14 09:00 AM
Re: Problem at the machine shop	Leon441	12/20/14 01:29 PM
Re: Problem at the machine shop	JohnRR	12/20/14 05:11 PM
Re: Problem at the machine shop	mike s	12/20/14 06:28 PM
Re: Problem at the machine shop	dragnduster	12/20/14 06:34 PM
Re: Problem at the machine shop	Tom Fox	12/20/14 10:36 PM
Re: Problem at the machine shop	cudadoug	12/21/14 04:40 AM
Re: Problem at the machine shop	sr4440	12/21/14 05:56 AM
Re: Problem at the machine shop	cudaman1969	12/21/14 06:12 PM
Re: Problem at the machine shop	Quicktree	12/21/14 06:23 PM
Re: Problem at the machine shop	cudaman1969	12/21/14 06:35 PM
Re: Problem at the machine shop	rickb67	12/22/14 12:10 AM
Re: Problem at the machine shop	TRENDZ	12/22/14 12:50 AM
Re: Problem at the machine shop	rickb67	12/24/14 05:36 AM
Re: Problem at the machine shop	draginmopars	12/24/14 06:26 AM
Re: Problem at the machine shop	J_BODY	12/21/14 06:09 PM

Hop To