Comp Cams KD516 Pushrod cutter sizes

Print Thread

Comp Cams KD516 Pushrod cutter sizes #1699434 11/15/14 10:11 PM 11/15/14 10:11 PM
Joined: Nov 2007 Posts: 245 Western PA O OldMoparMan OP enthusiast
OldMoparMan OP enthusiast O Joined: Nov 2007 Posts: 245 Western PA	Has anyone here used a Comp Cam KD516 5/16" pushrod cutter. I made a slide hammer slug and removed the cups from mt 7821 5/16" pushrods so I can shorten them but when I checked the shank section it measures .205 and the pilot is .197 but the KD516 tool shows these sizes (.169 bore, .157 pilot) I'm confused on these size differences Living with ALS help support the search for a cure Thanks http://web.alsa.org/site/TR/Walks/WesternPennsylvania?team_id=347781&pg=team&fr_id=12069

Entire Thread
Subject	Posted By	Posted
Comp Cams KD516 Pushrod cutter sizes	OldMoparMan	11/16/14 02:11 AM
Re: Comp Cams KD516 Pushrod cutter sizes	ahy	11/16/14 05:21 AM

Hop To