make sure the roll pins are removed, take the nut off, then the 2 bolts on the lower control arm, change bushing, slip rod end with 1/2 bushing into place, install 2 bolts in LCA, install 1/2 bushing/nut and torque to specs, torque 2 bolts on LCA.

ez-pz

I am doing a set with a driver side LCA/spring replacement on the 440 truck in the morning myself. also adding the borg steering shaft I picked up for 60$ used

swaped out the 3.91sg for a 2.76 gears along with the speedo pinion to correct speedo today on the 440 truck.

talk about highway legs.