I removed all the lug nuts, tire, and the nuts that are on the end of the axle that I guess hold the plate on that holds all the grease in. This truck has been sitting for about 20 years and runs and drives. I cannot seem to budge the drum off the rear driver side at all. Banged on it and tried to seperate it by prying it apart with screwdriver. I did not pull the little plate off the end of the axle as I can't get it off. It does come off right? Is that what has to happen first before you get the drum off so I can check the brakes?


Also any good way to get the wheel cylinders out? Brake line nuts are frozen going into wheel cylinder. Propane torch? I tried PB blaster and let soak but not working.