Phenolic Carburetor Spacers

Print Thread

Re: Phenolic Carburetor Spacers [Re: pjc360] #1660983 08/19/14 11:13 PM 08/19/14 11:13 PM
Joined: Jan 2003 Posts: 1,763 Windsor, ON, Canada D Diplomat360 top fuel
Diplomat360 top fuel D Joined: Jan 2003 Posts: 1,763 Windsor, ON, Canada	Speaking or carburetor base plate torque...what are you guys using? I installed my Carter TQ to a Holley Strip Dominator using a thin gasket, went with 100in-lbs torque...seemed just tight enough.

Entire Thread
Subject	Posted By	Posted
Phenolic Carburetor Spacers	pjc360	08/19/14 05:47 AM
Re: Phenolic Carburetor Spacers	RapidRobert	08/19/14 02:53 PM
Re: Phenolic Carburetor Spacers	rustbuckett68	08/20/14 02:36 AM
Re: Phenolic Carburetor Spacers	jcc	08/20/14 04:16 AM
Re: Phenolic Carburetor Spacers	pjc360	08/22/14 03:39 AM
Re: Phenolic Carburetor Spacers	RapidRobert	08/22/14 05:21 AM
Re: Phenolic Carburetor Spacers	pjc360	08/22/14 06:40 AM
Re: Phenolic Carburetor Spacers	YO7_A66	08/22/14 12:32 PM
Re: Phenolic Carburetor Spacers	pjc360	08/23/14 02:23 AM
Re: Phenolic Carburetor Spacers	roadhazard	08/23/14 02:27 PM
Re: Phenolic Carburetor Spacers	pjc360	08/23/14 11:38 PM
Re: Phenolic Carburetor Spacers	jcc	08/19/14 05:26 PM
Re: Phenolic Carburetor Spacers	Cab_Burge	08/19/14 05:30 PM
Re: Phenolic Carburetor Spacers	roadhazard	08/19/14 08:30 PM
Re: Phenolic Carburetor Spacers	Pynzo	08/20/14 02:43 AM
Re: Phenolic Carburetor Spacers	Diplomat360	08/20/14 03:13 AM

Hop To