Quote:

Who would be a good vender for a Mustang front suspension kit?
Dave



Fat man fabrication makes a front stub but there site is kind of hard to find stuff on
what I found was a stub for around $1,100.00 which I feel is a bit high.
I do most of my own work and I put 2 rails out the front and use a mustang II cross member or one from ebay

on my Race truck I have a stock mustang cradle that I cut out of a 1976ish mustang and trimmed down and fitted it to a 80's toyota PU frame rails.

you can get after market cross members on ebay but you will still need some kind of frame rails sticking out front to hook it to.

you might want to check out measurements of a stock Dakota chassis and see how wide they are, just remember the stock wheel are inboarded quite a bit.

here is the thread on my truck
https://board.moparts.org/ubbthreads/show...e=3&fpart=1


so with all that being said I sure don't know what would be the best way to go with your car.
it would all depend on how you feel about fabrication work and how much of it you can do..