Quote:

After much trial and error, I ended up w/two of the thin gaskets one on each side of the tray held in place w/Gaskasinch, silicone on end rails all the way across and silicone on the intake bolts since they see oil. Of course this is AFTER making sure the manifold doesnt need a kiss or two to make it fit properly w/gaskets and tray thicknesses........



This is the only way I got mine to finally seal. I didn't put silicone on the bolts but in my defense I didn't know any better. No leaks though.

I am running a performer RPM on aluminum Mopar heads.