Quote:

So if I am understanding right I could cut the rear section of all four leafsprrings- front and rear. The front part or the springs on the rear would then act as trailing arms then we could install the air ride. Probably with a panhard rod to keep the rear in its place. Sounds easy. The front I would do the same if there is room. I did not think of the turning forces on the suspension! This truck will have its original driveline in it.


you can do just that. the bag mounts will need side to side control via panhard bars on both ends, so make provisions for those mounting points when designing the bag mounts. this is really quite a simple setup to do[air bags that is] and i'm sure you can find several install videos to help you out. and of course pics would be appreciated !