Quote:
I had trouble getting to 72 in lbs on my last one (I was torquing more than I knew I should be doing & still could not reach 72 in lbs) so since I had the pan off I adjusted the clearance between both levers (kickdown/low and reverse) and the round flat button in the center of the pistons that the levers contacts per advice from Kunkel cuz that clearance is the bottom line that you want right
what clearance did ya use?
Tony
70 AARCuda Vitamin C
71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield)
71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas)
71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)
| 
