The amount of fuel leaving the cell is what you need to consider. I have imploded a plastic cell or two without the proper venting. If you have an AN8 leaving, then an AN8 vent should be used. If you have two AN8's leaving, then upsizing it, will be need to keep from creating a vacuum. My A1000 did a number on a plastic fuel cell of mine.

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk