OK, so my junk yard driveshaft had a dent in it and it threw it out of whack. It didn't really stand out and was more like a crease from a forklift. I had a new driveshaft made. The whole reason that I started this thread was because I had a leak that I couldn't isolate so I checked the driveshaft. The issue of the bushing came up and after 3 weeks and 3 attempts I finally got my new bushing today.

It turns out that my leak/gush was from the fact that the slip yoke didn't have the plug in the back of it. I didn't know that it was even there, or in this case not there.

Got the driveshaft in and no more leaks. The bushing will have to go in this weekend.

Thanks