That is my green Duster. The tires just fit in the wheelhouse and I don't have any problems with rub. My rear springs are the origional untouched but, they should be re-arched. That would probably give the rear another inch or two in height. I have Moser axles so I have the 4 1/2 inch bolt pattern but wheel vintique sells the same rear rim (15x8) in the 4 inch bolt pattern. As for the front tires, I wanted bigger tires but, everybody was out of stock so I was relagated to the smaller size. The front wheel wells look empty because at the time of the picture, I had just put the engine back in after it had been sitting without an engine for about 2 years. The front end has since settled in lower. The front doesn't look as empty now as it did in that picture. Good luck... Matt