|
Re: 1985 dodge half ton rear end, LCA, steering wheel, ?'s
[Re: C_stripes]
#1597298
03/23/14 06:45 PM
03/23/14 06:45 PM
|
Joined: Jun 2003
Posts: 3,325 Truckville, the capital of NY
85_Ram_4speed
master
|
master
Joined: Jun 2003
Posts: 3,325
Truckville, the capital of NY
|
Quote:
I have a 1985 dodge ram with the 9.25 12 bolt rear end and 5 on 5.5 bolt circle. I have been looking for a sure grip unit for it and found a lot on eBay, however they are not very descriptive. I am wondering what spline my rear end should be and what years of sure grip unit will work?
There was a c-clip change around '85. That will be your determining factor on what suregrip units will work and what wont.
I asked this question to Dr Diff (Cass) and here was his response:
Quote:
I don't know the dimensions, but in 1985, the thickness of the C-clips and the depth of the groove in the axles increased. I would stick the axles and C-clips into the carrier and check the fit.
So assuming your '85 has the newer parts, I believe '85-up should fit.
Spline count was unchanged as far as I remember on all 9 1/4's.
Outcast Dodge guy.
|
|
|
Entire Thread
|
1985 dodge half ton rear end, LCA, steering wheel, ?'s
|
C_stripes
|
03/23/14 05:07 PM
|
Re: 1985 dodge half ton rear end, LCA, steering wheel, ?'s
|
98RAM1500
|
03/23/14 05:30 PM
|
Re: 1985 dodge half ton rear end, LCA, steering wheel, ?'s
|
BulletBob
|
03/23/14 09:39 PM
|
Re: 1985 dodge half ton rear end, LCA, steering wheel, ?'s
|
98RAM1500
|
03/23/14 10:31 PM
|
Re: 1985 dodge half ton rear end, LCA, steering wheel, ?'s
|
85_Ram_4speed
|
03/23/14 10:45 PM
|
Re: 1985 dodge half ton rear end, LCA, steering wheel, ?'s
|
135sohc
|
03/24/14 01:19 AM
|
Re: 1985 dodge half ton rear end, LCA, steering wheel, ?'s
|
scratchnfotraction
|
03/24/14 02:32 PM
|
Re: 1985 dodge half ton rear end, LCA, steering wheel, ?'s
|
BulletBob
|
03/24/14 11:15 PM
|
|
|
|
|