Four barrel carb for 318

Print Thread

Re: Four barrel carb for 318 [Re: 340clone] #1578716 02/13/14 11:33 PM 02/13/14 11:33 PM
Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska	That ain't too much carb for it. I'm sure it is significantly less than 600 cfm (measure its' bores). What symptoms are you having? I have an Eddy 1406 600 cfm on a DD 318 & it runs flawless. All OE AVS's are emission carbs and are lean plus the air door adjustment. I'd suggest converting to Eddy performer 2 step rods/primary jets from a strip kit with sizes close to whatever is in the AVS right now maybe going several thou smaller on the "cruise" step for a start. You WILL notice the difference but holler back with what's going on live every 24 hour block of time like it's your last day on earth

Entire Thread
Subject	Posted By	Posted
Four barrel carb for 318	340clone	02/14/14 01:58 AM
Re: Four barrel carb for 318	RapidRobert	02/14/14 03:33 AM
Re: Four barrel carb for 318	dogdays	02/14/14 05:53 AM
Re: Four barrel carb for 318	goldmember	02/14/14 06:02 AM
Re: Four barrel carb for 318	340clone	02/14/14 07:01 AM
Re: Four barrel carb for 318	roe	02/14/14 07:09 AM
Re: Four barrel carb for 318	Baxter61	02/14/14 07:10 AM
Re: Four barrel carb for 318	slantzilla	02/14/14 12:57 PM
Re: Four barrel carb for 318 DELETED	Supercuda	02/14/14 01:44 PM
Re: Four barrel carb for 318	RapidRobert	02/14/14 04:55 PM
Re: Four barrel carb for 318	pinkduster	02/15/14 03:51 PM

Hop To