Quote:

The automatic dipstick tube and dipstick are hemi specific. The tube mounted to the manifold; the rear stud that fastens the heat tube to the manifold. Also the dip stick is 2 pieces and riveted together.


I don't rememeber any of the stock street Hemi dipstick tubes mounting to the exhaust, the ones I remember where attached to the passenger side trans bellhousing bolts or had a small tab on the botom of the dipstick that was held into the trans case by a 5/16 bolt Maybe not I only worked on a few of the originals, not all years either


Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)