it has begun - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech it has begun

Print Thread

Re: it has begun [Re: Moparnut426] #1571282 01/31/14 09:14 PM 01/31/14 09:14 PM
Joined: Mar 2007 Posts: 12,008 Finally a HUSKER again Moparnut426 OP I Live Here
Moparnut426 OP I Live Here Joined: Mar 2007 Posts: 12,008 Finally a HUSKER again	Well, I started today on the housing. I bolted in a 3rd member, tacked the brace up, and in 12 steps I welded it all up. Its 8 degrees outside, so I set the housing and left the center section bolted in and set it outside to slowly cool till tomorrow. 8020410-housing1.jpg (61 downloads)

Entire Thread
Subject	Posted By	Posted
it has begun	Moparnut426	01/30/14 10:32 PM
Re: it has begun	Bad340fish	01/30/14 10:36 PM
Re: it has begun	Moparnut426	01/30/14 10:39 PM
Re: it has begun	Moparnut426	01/30/14 10:40 PM
Re: it has begun	Moparnut426	01/31/14 05:33 PM
Re: it has begun	Triple Threat	01/31/14 06:49 PM
Re: it has begun	SpareParts	01/31/14 07:09 PM
Re: it has begun	Moparnut426	01/31/14 09:30 PM
Re: it has begun	Moparnut426	01/31/14 09:33 PM
Re: it has begun	tboomer	01/31/14 10:28 PM
Re: it has begun	Thumperdart	02/01/14 01:49 AM
Re: it has begun	Racer33	01/31/14 07:04 PM
Re: it has begun	Moparnut426	02/01/14 01:14 AM
Re: it has begun	Moparnut426	02/01/14 01:19 AM
Re: it has begun	Moparnut426	02/01/14 01:21 AM
Re: it has begun	justinp61	02/01/14 02:36 AM
Re: it has begun	Moparnut426	02/01/14 03:29 AM
Re: it has begun	6bblRoadrunner	02/02/14 02:22 AM
Re: it has begun	Moparnut426	02/02/14 06:32 AM
Re: it has begun	mopardamo	02/02/14 06:37 AM
Re: it has begun	Moparnut426	02/03/14 04:49 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1