RB vs. B on width - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer RB vs. B on width

Print Thread

Re: RB vs. B on width [Re: The Sphinx] #1569151 01/27/14 04:54 PM 01/27/14 04:54 PM
Joined: Jan 2003 Posts: 25,935 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,935 Rio Linda, CA	The factory Racing Manual has the following width dimensions: Valve cover-to-valve cover: B= 22.5" RB= 23.8" Exhaust manifold-to-exhaust manifold: B= 26.25" RB= 28.8" The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
RB vs. B on width	The Sphinx	01/27/14 12:22 AM
Re: RB vs. B on width	RapidRobert	01/27/14 12:53 AM
Re: RB vs. B on width	Dodgem	01/27/14 04:55 PM
Re: RB vs. B on width	RapidRobert	01/27/14 11:12 PM
Re: RB vs. B on width	440Jim	01/28/14 03:43 AM
Re: RB vs. B on width	RapidRobert	01/28/14 04:16 AM
Re: RB vs. B on width	John_Kunkel	01/27/14 08:54 PM
Re: RB vs. B on width	The Sphinx	01/27/14 09:59 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1